Hello all, I wanted to make a brief post before I begin searching eBay and other platforms for a pair of rear brake flex hoses for my 2.0-liter diesel Ghia X estate. Any suggestions?
I might also be keen on acquiring a comprehensive nearside hub assembly that includes a quality bearing, should anyone have one available for purchase.
Recommendations for braided rear brake flexi hoses
-
Hunger_for_love
- Moderator
- Posts: 131
- Joined: Tue Mar 10, 2020 8:44 pm
I might also be keen on acquiring a comprehensive nearside hub assembly with a functional bearing if anyone has one available for purchase.
Utilise the front bearing, as the rear consists of a complete hub bearing with merely four bolts, rendering the use of a pre-owned hub bearing unnecessary.
I have utilised unbranded rear hubs costing £30, which are now a decade old and have endured 35,000 miles.
Utilise the front bearing, as the rear consists of a complete hub bearing with merely four bolts, rendering the use of a pre-owned hub bearing unnecessary.
I have utilised unbranded rear hubs costing £30, which are now a decade old and have endured 35,000 miles.
-
James_Cam00
- Moderator
- Posts: 101
- Joined: Sat Jul 06, 2019 8:23 pm
Regarding the brake hoses, if we are discussing standard options, I have previously utilised Pagid and have been satisfied with their performance (the same brand as TMD Friction). You might consider Ford, as I have observed that many frequently replaced components are often similarly priced to quality aftermarket parts.
If you are seeking a performance enhancement, I have previously utilised Goodridge on a modified vehicle and found them to be excellent. I cannot endorse HEL performance as they appeared to be incompatible with a Mondeo.
That is my personal experience; however, it is important to note that nowadays, you might purchase an item labelled as XYZ, which is actually produced by ABC at a lower cost, including from OEMs. It appears that numerous companies today disregard their formerly reputable brand names and opt to market outdated merchandise, a broad observation not limited to the automotive sector.
If you are seeking a performance enhancement, I have previously utilised Goodridge on a modified vehicle and found them to be excellent. I cannot endorse HEL performance as they appeared to be incompatible with a Mondeo.
That is my personal experience; however, it is important to note that nowadays, you might purchase an item labelled as XYZ, which is actually produced by ABC at a lower cost, including from OEMs. It appears that numerous companies today disregard their formerly reputable brand names and opt to market outdated merchandise, a broad observation not limited to the automotive sector.
-
James_Cam00
- Moderator
- Posts: 101
- Joined: Sat Jul 06, 2019 8:23 pm
-
Germancars
- Senior
- Posts: 88
- Joined: Thu Dec 24, 2020 11:25 pm
I recently substituted my rear hoses with Pagid components from Euro Car Parts, but it appears that ECP no longer carries parts for MK3 Mondeos.
-
RogerSalesCar
- Moderator
- Posts: 125
- Joined: Sat Aug 24, 2019 10:25 pm
I extend my sincerest apologies to all.
I must have been partially asleep yesterday, as I should have mentioned BRAIDED rear flexis and a front nearside hub assembly! However, I am pleased to experiment with Pagid alternatives. Regarding a hub assembly, I considered that acquiring one could facilitate a quicker hub replacement, allowing me to return to the road sooner while I replace my original assembly bearing at my convenience.
I must have been partially asleep yesterday, as I should have mentioned BRAIDED rear flexis and a front nearside hub assembly! However, I am pleased to experiment with Pagid alternatives. Regarding a hub assembly, I considered that acquiring one could facilitate a quicker hub replacement, allowing me to return to the road sooner while I replace my original assembly bearing at my convenience.
-
Hunger_for_love
- Moderator
- Posts: 131
- Joined: Tue Mar 10, 2020 8:44 pm
If you were in proximity, you could complete the bearing in 2 to 3 hours, contingent on its level of seizing, thus avoiding a repeat of the task.
-
RogerSalesCar
- Moderator
- Posts: 125
- Joined: Sat Aug 24, 2019 10:25 pm
You are attempting to coerce me once more, amusingly.
-
85KillallRU
- Moderator
- Posts: 132
- Joined: Mon Apr 05, 2021 9:28 pm
With a sledgehammer of that calibre, he could accomplish far more than merely contorting your limb. 
-
StartingWar22
- Senior
- Posts: 51
- Joined: Sun Jul 11, 2021 2:15 pm
I am pleased that you are opting for braided hoses, as they surpass conventional rubber ones in durability and provide significantly enhanced braking performance. I installed some on my present vehicle 16 years prior, and they still appear pristine.