JustCarsForum - Your Ultimate Automotive Community

Has anybody installed 30/45 H&R lowering springs on their Audi A4 B8? I have a preference for maintaining the regular level and do not want for it to be far lower. If anybody has any suggestions for visual representations of the content they have on their A4 paper, it would be really appreciated.

The 40mm H & R springs! I loveeeeeeeeeeeeee

Do you have front-wheel drive (FWD) or all-wheel drive (Quattro)?

Only 2.0tdi 2WD models are available.

I would prefer Eibach over H&R. I would recommend using H&R only in cases when an individual has a well-cushioned posterior.

I am now using the Eibach Prokit suspension system.

Bobby Singh first installed H&R suspension on his Audi A4 B8 3.0 TDI quattro Avant, which resulted in a significant increase in horsepower to 600 bhp. However, Singh had issues with the H&R suspension, finding it to be too firm. Consequently, he made the decision to switch to Eibach suspension, which provided him with a more satisfactory driving experience.

If one wants to maintain a regular level of suspension, it is recommended to choose Eibach Pro springs as the most suitable choice.

In recent years, I have equipped my vehicle with the B16 suspension system with ride control. This particular suspension system has proven to be the most exceptional I have encountered so far in terms of road car performance. Despite the significant cost, the expenditure was deemed worthwhile. It is regrettable, however, that the kit was not produced for the S2 Avant model. Nevertheless, the individual expresses a willingness to repurchase the kit if it were made available.