JustCarsForum - Your Ultimate Automotive Community

Good morning,
I was hoping someone here may be willing to part with a set of inner sills for their TR3 before I go out and buy new ones.

Please accept my sincere gratitude

In the past, there were a number of inner sills on the market that didn't fit very well. Several sets were required until I finally found one that was satisfactory. I still have some sills, but I wouldn't advise using them.
In my opinion, the problems with the subpar units have been fixed, therefore it's best to get a brand-new set from an authorized Triumph dealer.
Just so you know

I appreciate the help. Please elaborate on the problems you had with the sills.

Private Message sent.

I'm trying to find a TR4 block in the Southern California area; do you have any suggestions?

It would be preferable to shift to a fresh subject. Not likely to be hard to come by where you are. I can think of a handful in New England, but transport costs will be high.

SoCal resident Albert Roth is who you should get in touch with.
This previous spring he already had a few.

I purchased an inner right-side sill from TRF. After removing the outside sil and seeing the inner was in better condition than I had given it credit for, I decided against utilizing it. The left half of my body fit well. If you still need a right side, please let me know.

TRF inner sills with grey epoxy primer are collecting dust in my garage. I will split the cost of delivery and you may save money compared to buying new. 248 761 2673