Page 1 of 1
R53 valve cover gasket
Posted: Thu Nov 14, 2024 2:36 pm
by Sophie_Williams2001
I need to determine whether sealant is required for replacing the rover cover gasket on my R53. Any assistance will be welcomed, thank you.
Re: R53 valve cover gasket
Posted: Thu Nov 14, 2024 2:37 pm
by David_Smith2003
Rubber may be removed from surfaces with brake cleaner; a fresh seal will adhere more effectively to surfaces and prevent leakage when it warms.
Re: R53 valve cover gasket
Posted: Thu Nov 14, 2024 2:38 pm
by Sophie_Williams2001
Thank you.
Re: R53 valve cover gasket
Posted: Thu Nov 14, 2024 2:38 pm
by godisgreat
Ensure that no sealant is used and that the surfaces are well cleaned.
Re: R53 valve cover gasket
Posted: Thu Nov 14, 2024 2:39 pm
by Sophie_Williams2001
Does the sump gasket need sealant?
Re: R53 valve cover gasket
Posted: Thu Nov 14, 2024 2:39 pm
by godisgreat
It does not. Avoid adhesive substances; use just a gasket and ensure the surfaces are clean. The sump gasket is affixed to the engine block rather than the sump pan during reinstallation.
Re: R53 valve cover gasket
Posted: Thu Nov 14, 2024 2:40 pm
by Sophie_Williams2001
Thank you.