Replacement of Reversing Cameras
Posted: Tue Mar 17, 2026 10:02 am
hi, How do I remove the trim from the back of the Tail Gate so I can replace the reverse camera in my Venga4? Thank you ahead of time
JustCarsForum - Your Ultimate Automotive Community
Welcome to JustCarsForum, the go-to platform for automobile enthusiasts. Discuss, learn, and share your passion for all things car-related, from vintage classics to cutting-edge EVs.
https://justcarsforum.co.uk/
Replacement of Reversing Cameras
Page 1 of 1
Re: Replacement of Reversing Cameras
Posted: Tue Mar 17, 2026 10:03 am
For the purpose of replacing the reversing camera, how can I remove the plastic cover from the inside of the tailboard?
Re: Replacement of Reversing Cameras
Posted: Tue Mar 17, 2026 10:04 am
You might find some videos on YouTube. On the other hand, you'll have to remove the trim from every single car.
that is
that is
Re: Replacement of Reversing Cameras
Posted: Tue Mar 17, 2026 10:04 am
Re: Replacement of Reversing Cameras
Posted: Tue Mar 17, 2026 10:04 am
It's the same year and model as yours, and I'll have a butcher at mine tomorrow.
Re: Replacement of Reversing Cameras
Posted: Tue Mar 17, 2026 10:05 am
Good luck! Removing the huge trim pieces does not appear to be an insurmountable task.
Re: Replacement of Reversing Cameras
Posted: Tue Mar 17, 2026 10:05 am
Following the instructions in my Gen 1 repair manual, I carefully pry it off, being careful not to snap the ubiquitous clips.
It depicts two screws inside the handle recesses and two screws on the exterior borders of the trim.
It depicts two screws inside the handle recesses and two screws on the exterior borders of the trim.
Re: Replacement of Reversing Cameras
Posted: Tue Mar 17, 2026 10:06 am
