The code 0340 refers to the Camshaft Position Sensor.

[JamidP]

The diagnostics yielded error codes 0340 and 0345. Where can one find the most reputable source for purchasing a camshaft sensor specifically designed for a 2007 V8 engine?

[Martin_Smith76]

Rock Auto offers a selection of affordable products for purchase, although with potentially high shipping costs despite generally prompt delivery. Could the jag s type and the aforementioned vehicles be identical?
Many instances of cam sensor codes were found to be associated with elongated timing chains. It may be advisable to consider replacing the sensor if it is reasonably priced, while hoping for a favorable outcome.

[dontito]

The vehicle enhancements include the installation of a Saleen supercharger kit with a JDM tune, a 3.4 pulley, a Keene bell boost a pump, a BBK 62mm Twin Throttle body with a spacer, as well as the use of EBC drilled vented and grooved discs in the front, accompanied by red stuff pads for all wheels. The boost gauge and fuel pressure gauge are two important instruments used in automotive applications.The oil separator is a device used for the separation of oil from other substances. Additional 5-inch fans are required for the heat exchanger, as well as a 7-row oil cooler. The vehicle is equipped with braided steel brake hoses on all four wheels, as well as BMR rear lower control arms. The total horsepower is 481 Bhp. Additionally, the Saleen Mustang has all the customary enhancements and improvements. The production number during that year was 192 out of a total of 945.

[JamidP]

Thank you for providing the information. The price for the item in question is £5.25 on the respective platform. I have made a purchase of two items. It is my expectation that this action will resolve the issue at hand.
If the issue pertains to elongated timing chains, I will seize the chance to include bigger camshafts.

[JamidP]

Based on my reading, it has been suggested that the potential causes for the issue at hand might be either the alternator or the powertrain control module (PCM). I will inspect the alternator in light of the recent replacement of a non-functioning battery. I will inspect all of the wiring as well.
The aforementioned data was obtained via the diagnostic assessment.

[Martin_Smith76]

The alternator, in both my case and presumably yours as well, is a crucial component.
Please inform us of the result.

[JamidP]

The present communication aims to provide an updated report on the issue at hand.

The code has been eliminated with the replacement of the Camshaft sensors.
The current situation involves the observation of a low oil pressure indication on the dashboard, accompanied by a reading of zero on the oil gauge. The engine has the appropriate quantity of oil.
The vehicle is experiencing a tough operating condition.
The scanner does not display any codes.
Has anybody encountered this issue?

[dontito]

I am uncertain without consulting other sources, but is it possible that we own a sensor located on the sump that would be worth investigating?

[JamidP]

I have placed an order for an oil sensor located next to the oil filter. It is anticipated that the proposed solution would effectively address the issue at hand.

[Martin_Smith76]

If my recollection serves me properly, there is a dial located on the dashboard. It is worth noting that the stepper motors responsible for the functioning of all the dials have a tendency to malfunction. Therefore, it is plausible that the issue is with one of these stepper motors.
Alternatively, it is recommended to have the oil pressure examined.